Self-tightening knots for clothesline, bracelet, line, reel

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

Usually a person has several knot schemes in his arsenal. They are quite enough to tie shoelaces, a belt, connect the ends of the rope in case of a break. To make a knot for a tie, to “build” an elegant bow, to mount fishing tackle, practice is already required. Everyone can take a step forward and learn how to knit self-tightening knots. It will take a piece of rope, a little time and desire. In addition, many of the simple schemes will be useful for domestic needs.

Application

Self-tightening knots are not only used by climbers and sailors. Some sources claim that there are about twenty such schemes. Knowing them all is not necessary even for a professional. But some universal combinations can be useful for a simple layman.

When relaxing in nature, the “constrictor” knot will securely fix the hammock, the “gazebo” knot will help to equip a canopy from the rain. For hostesses, there is a “burlak sea loop” if it becomes necessary to pull a clothesline from sagging or organize drying for the collected medicinal herbs. Walking the dog, sometimes arisesthe need to leave the pet securely tied to a support for a while. A simple "cow knot" will come in handy. It ties easily and quickly releases the leash.

Self-tightening line knots should be in every angler's arsenal. They are also useful for securely fastening the boat. For mountain trekkers, knowing the knots for belay equipment is a must.

Features

The principle of operation of such schemes lies in the definition itself. Pulling on one or both ends of the rope tightens the knot. Moreover, the stronger the force, the stronger the connection will be. But it should be remembered that some self-tightening knots reliably "work" only with constant tension. If the force is expected to change or be jerky, the connection may loosen.

Self-tightening knots tie around any secure support. They hold especially well on a non-slip cylindrical base: a tree trunk, a stump, a branch, a power pole, and the like. The simplest knitting pattern involves only three movements. Form a semicircle by wrapping the free end around the base.

Continuing to move, it is brought under the main rope and passed into the now formed loop. In fact, this is the same knot as when tying shoelaces. But in the loop formed during its formation there is a support. Now, when pulling the main rope, the free end will be pressed against a hard surface, which will prevent the structure from untying.

Varieties

To increase the reliability of the scheme described above, you can do a few more simple manipulations. After tightening the knot, the free end is re-thrown around the support, led behind the main rope and passed into the newly formed loop. Such a knot is called "with a half bayonet." You can make one, two or more reinsurances, if the length of the rope allows. Such self-tightening knots will be more perfect, they will stay on the support even with a variable load.

In order not to be afraid of accidentally untying them at all, you can use a “constrictor”. This translates from Latin as "boa constrictor". And these reptiles, as you know, when holding the victim, form very strong rings. The constrictor is often impossible to untie at all and the rope has to be cut. However, if you do not apply excessive force, the knot will do a good job of tightening the neck of the bag, and securing the clothesline. In case of emergency, it is best suited to clamp a damaged artery or vein during bleeding.

Scheme option

More complex knots are based on basic combinations. So, based on the above diagram, several more connection options can be made, including self-tightening knots for fishing line. On the one hand, they become a little more difficult to perform, but on the other hand, they make the basic combination universal. Depending on the situation, you can easily switch from it to other types.mounts.

For example, the simple self-tightening knot described above can be made quickly untied. To do this, before tightening the loop, the free end of the rope is passed in the opposite direction (not completely) to form another loop. If necessary, you can pull the free “tail” formed at the same time to effortlessly untie the fasteners. The scheme in this design is called the "boat assembly". It simultaneously holds the boat well on the pier and allows you to quickly set sail from the shore, just by pulling the edge of the rope.

Complication

Using a simple self-tightening knot as a basis, you can easily move on to the noose pattern. To do this, before tightening, the free end is wrapped three times around the rope that formed the loop. With uniform tightening, the connection is securely fixed due to repeated pressing force to the support. It is problematic to untie such a knot without loosening the main rope.

A self-tightening knot with a loop can be useful in everyday life for shortening a sagging clothesline. With it, you can temporarily “hide” (make inactive) a section of the cord with damaged fibers, which theoretically can break under load. The advantage of the "burlak sea loop" knot is its ability to tie on any part of a fixed rope that does not have free ends.

How to make a self-tightening knot on a bracelet?

There may be several options. The easiest - if at one end of the bracelet there is already a loop of rope orfishing line. This is done because it is difficult to work with one hand without outside help. In this case, a massive decorative knot is knitted at the other end.

It must be large enough to fit snugly through the hole in the hinge. The knot is knitted with the expectation that when it is “fastened”, the strap will need to be slightly pulled. After threading through the eyelet, the force will be loosened, but the loop will not be able to come off on its own.

So that the self-tightening knot for the bracelet cannot accidentally come loose, it is easiest to use the scheme described above. The free end is threaded into the eyelet, turned in the opposite direction, wound under the main ribbon and passed into the loop formed. You can use for these purposes and the variants of the schemes shown in the photographs above.

Fishing: how to make a self-tightening knot

Oddly enough, in order to fix the end of the fishing line (cord) on the reel, in principle, you can use the same simple scheme, especially if you additionally strengthen it with two or more “half-bayonets”, and even put a layer of adhesive plaster on top. However, fishermen usually use a different scheme for this - with a tightening loop.

For the convenience of such fastening, the spool is removed from the reel. A loop is knitted at the end of the fishing line in any convenient way. It is best to do this with the "eight", but this is not important. After that, at some distance (15-20 cm) from the formed knot, the main fishing line is captured, folded in half and threaded through the eye.

The new loop formed at the same time is pulled to a sufficient distance so that the diameter of the circle allows you to put it on the spool. Self-tightening knots on the reel with a sealing loop, on the one hand, will keep the fishing line from slipping, and on the other hand, allow it to be removed and changed if necessary, without cutting the connections. If the loop still slips, then it was placed on the wrong side when you put it on the spool and should be turned 180 degrees.