Table of contents:

Knitting mittens with knitting needles: tips for needlewomen
Knitting mittens with knitting needles: tips for needlewomen
Anonim

Mitts are an original product that keeps hands warm and looks very stylish at the same time. In addition, it is incredibly convenient, because if you need to answer a call on a touch phone or collect change for the road, you do not need to take off your mittens. Because they don't cover their fingers. Unlike gloves and mittens. And perhaps this nuance is the most negative. It is this part of the brush that remains uncovered, and therefore freezes. However, in most modern models, a special part is provided that is worn on the fingers, like a hat. At the right time, you can simply remove it, and if it suddenly becomes cold again, return it to its original place.

Thus, this piece of clothing can be praised endlessly. But it is often very difficult to find the desired model in stores. You have to choose from what you have. And such a thing is not always completely satisfactory. That is why many beautiful persons prefer to master the technology of knitting mitts with knitting needles, in order to then fulfill the model that will fully comply with the wishes of the hostess.

Soin this article we will find out how to knit mitts.

Important secrets and features of knitting

The most important thing to note is that mitts are much easier to knit than gloves, but almost the same as mittens. With the exception of the upper part, the technology is almost identical, so beginners in the future can safely choose their favorite pattern described for the mittens. However, there are still some subtleties in the performance of mitts. But you shouldn't be scared and give up the idea to please yourself with a wonderful new thing. After all, it is not difficult to understand the technology. And only then to execute any desired model is absolutely not difficult.

do-it-yourself mittens
do-it-yourself mittens

So, first we should explain how the mitts are knitted. In fact, their technology is similar to hosiery. After all, here we also use four main knitting needles and a fifth auxiliary. There are no special recommendations regarding the threads. You just need to focus on what season you need the product. And already then choose the thickness and warmth of the yarn. But when choosing knitting needles, we recommend paying attention to iron ones. They will ensure the proper sliding of the thread and, accordingly, will greatly facilitate the process of knitting mitts for beginners.

Also, most experienced needlewomen advise beginners to knit the first product for themselves. And not at all because the training model may not be entirely successful. Just at any time, you can try on mittens, evaluate how they look on your hand, what length they are best to make, and many other importantaspects.

It is also very important to mention that traditionally mittens have only a hole for the thumb. But among the abundance of models, you can also see options that resemble gloves, only without fingers. In principle, both can be connected. But the first one is much easier to do. Therefore, we strongly recommend that beginner needlewomen learn to knit classic mitts.

How to take measurements from your hand

Taking care of the needles and threads is not enough. After all, it is difficult to start knitting products without knowing the parameters of your own hand. It is for this reason that next we will talk about how to perfectly match the mitts.

So, to understand how to take measurements from your hand, you should look at the picture below. Where letters indicate areas of the palm that need to be measured.

how to measure palm for mitts
how to measure palm for mitts

Distance under letter:

  • A is the circumference of the wrist.
  • B - length from wrist to notch between thumb and forefinger.
  • B - the length of the palm from the wrist to the tip of the middle finger.
  • G - palm circumference.
  • D - the length from the notch between the thumb and forefinger to the conic of the thumb.

Also, if desired, you can immediately determine the desired length of the mitts. Basically, they cover only the middle phalanx of the little finger. But if you really want, you can make them longer. This is the advantage of knitting mitts with your own hands.

Basic knitting basics

These are experienced knitters who understand what actions are hidden, for example, behind the phrase"back loop". For beginners, it will not say anything at all. That is why the idea to knit mittens may remain unfulfilled. and this is very sad. To help our reader in mastering an interesting science, we offer graphic instructions that will certainly help to understand the correctness of actions. And, accordingly, learn the basics of knitting.

knitting basics for beginners
knitting basics for beginners

After that, you can prepare yarn and knitting needles, and then, finally, proceed to the most interesting thing - research and execution of master classes.

Video tutorial for beginners

Describe the technology of knitting mitts with knitting needles can be quite long and incredibly detailed. But this is not at all a guarantee that beginners will understand how to correctly perform the necessary actions. But our instructions are written for beginners. Therefore, we invite the reader to start mastering the technology of knitting an interesting product using detailed video instructions. In which the author clearly describes all the steps. We, in turn, will also give some simple master classes.

Image
Image

Simple mittens for beginners

This option is also very easy to perform. Especially considering that it is also based on the principle of knitting mittens (44 loops) with knitting needles, the video of which we presented above.

A simple technology is as follows:

  1. You need to dial forty-five loops on the knitting needles.
  2. Then distribute them on four needles.
  3. Knit the first and last as one. Thereby securingthem.
  4. Next, we knit in a circle with an elastic band two by two, alternating purl and facial loops.
  5. Having knitted twenty rows, we knit not in a circle, but with a common canvas, not forgetting to follow the pattern.
  6. After about ten rows (depending on the thickness of the thumb), we again begin to knit the product in a circle. Continue like this until we get the desired length of the mitts.

The photo of the finished result and the gum scheme are presented below.

rubber band mitts 2 by 2 scheme
rubber band mitts 2 by 2 scheme

Floral mittens

Another great idea for knitting mitts with knitting needles does not require a detailed description. Because the necessary actions become obvious thanks to the diagram below.

knitting mitts
knitting mitts

It's very easy to make these mitts:

  1. We cast forty-four loops on the knitting needles and close them in a ring.
  2. After that we knit twenty-five rows with an elastic band one on one.
  3. Then we move on to the execution of the pattern, moving in a circle.
  4. After twenty rows we move on to knitting a single fabric, marking the hole for the thumb.
  5. After twelve rows, we begin to move in a circle again.
  6. We determine the length of the mitts ourselves. The main thing is not to forget to knit four or five rows of elastic at the end to make the product complete.
  7. Knit finger at will.

Butterfly mitts on two needles

If the instructions described above seem too complicated to our reader, we offer him the following option of knitting mittens with twoknitting needles. It is carried out really elementary, moreover, it is knitted with a single canvas from the very beginning. And then just sewn together, excluding thumb holes.

However, these mittens are best knitted for spring or autumn. Because it is recommended to make them from thin threads, and use knitting needles under the number 1, 5 or 2.

So, we collect seventy-three loops and knit an elastic band one by one. Then we knit according to the scheme, it can be seen at the end of the paragraph. We finish the product with an elastic band.

mitts with a bow tie pattern
mitts with a bow tie pattern

Mitts with the symbol of 2018

If desired, knitting mitts on 2 knitting needles can be based on the following figure. In it, just like in the previous ones, purl and facial loops are used. But the one-on-one elastic band is preceded by an interesting part with the image of bones.

mittens with the symbol of the year
mittens with the symbol of the year

In 2018, such a pattern will be especially relevant. After all, according to the Chinese calendar, now we have a yellow dog. Therefore, many needlewomen will not have any difficulties with choosing a color.

Owl gloves

Surely any child and even some adults will be delighted with amazing and very unusual mitts. After all, they depict the wisest bird, which in this case looks very cute and funny.

mittens with an owl pattern
mittens with an owl pattern

This technology of knitting mitts with knitting needles also does not require a description. Because everything becomes clear thanks to a simple scheme. Where purl loops are indicated in blue and white, facial loops are in brown. AtIf you wish, you can depict an owl using yarn of a different color, but then the knitting process will become much more complicated. After all, the threads can get tangled.

Openwork mitts

Very beautiful mitts are obtained by adding air loops. Then the product will turn out to be very elegant and original. Plus, it's perfect for summer or spring.

To perform unusual, but rather simple in terms of technology, mittens, you will need to carefully study the following diagram and the interpretation of the symbol presented to it.

openwork mitts knitting
openwork mitts knitting

Below we will describe in more detail the technology of knitting.

Mitts for women with knitting needles are knitted according to the steps described above more than once:

  1. Ribing one on one or two on two on two needles.
  2. Following the pattern shown in the diagram.
  3. Finishing the product with the selected elastic band.
  4. Stitching the finished fabric leaving a hole for the thumb.

Mitts for the New Year

Another interesting mitt idea is based on a simple pattern that consists of air loops, knit and purl. Rapport is the basis of the drawing of eighteen loops, there are no edge loops. Because in our case it is best to knit the product in a circle, using four main knitting needles and one additional one. But you can, as in the previous versions, make the product on two knitting needles.

mitts knitting pattern patterns
mitts knitting pattern patterns

First, as usual, we collect forty-four loops, close them in a circle and knit with an elastic band for 20-25 rows. Ormore if you want to make long mitts. Then we knit according to the presented scheme. Perhaps the attentive reader noticed that it is based on a triangle without one vertex, and, therefore, its repetition will help create an interesting openwork Christmas tree. That's why we named this drawing New Year's.

So, focusing on the scheme, it is not difficult to complete the pattern. But if the reader best perceives the information visually, we offer further a detailed master class "Knitting mitts with knitting needles with a Herringbone pattern."

Image
Image

Thus, it is incredibly easy to please yourself and your loved ones with an original and very fashionable new thing at the present time. Thanks to the presented instructions, diagrams and step-by-step descriptions of the necessary actions, even beginners will be able to cope with the task. The most important thing is that the desire to gain new knowledge and make an interesting thing with your own hands glimmers in your soul. And then the process of knitting mitts will bring only pleasure.

Recommended: