How to make a cap from a newspaper? Step-by-step instruction

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

In hot weather, a cap is a necessary accessory. But it is not always available. By creating origami, you can give the newspaper a second life and get the necessary thing. This article will step by step describe how to make a cap from a newspaper.

There are several options for making newsprint hats. So let's look at some examples. For manufacturing, you will need a standard sheet of newspaper or other paper, the size of which is at least 53 X 53 cm. A newspaper cap will not protect you from rain, but it will be a great helper when you are under the scorching sun. Its use is especially relevant in the garden or during outdoor recreation.

Classic newspaper cap with visor

1. A square is made from a sheet of newspaper. To do this, one of the corners is laid diagonally. The lower part of the newspaper is superimposed on the resulting triangle and cut off.

2. The sheet is left folded at an angle of 45 degrees or folded. If everything is done correctly, a triangle is obtained.

3. The paper is turned over with the wide side of the triangle down.

4. The upper corner is bent to the center of the lower part of the figure formed earlier.

5. The folded corner is raised, and the lateral lower parts of the workpiece are laid on top of each other towards the top. In appearance, the resulting figure resembles a trapezoid.

6. One of the parts (located on top) of the raised corner falls down and is tucked under the folded layers. It is necessary to press it harder for a more secure fit.

7. The workpiece must be turned over with the other side towards you.

8. Then the rest of the triangle is laid down.

9. The model flips 180 degrees. After that, the lower part opens up so that the inside of the future cap is visible.

10. Next, you need to press the sides to shape.

11. The upper parts are laid so that the view from the inside exactly matches the drawing. The corners are bent towards the center and look at each other.

12. The last step is to form the visor. First you need to lay it up, then bend it back, leaving 1-2 cm from the fold line.

Done! That's the whole instruction on how to make a cap from a newspaper.

A simple version without a visor

This is an easy optionmaking caps with your own hands.

1. We take a sheet of newspaper.

2. Fold in half to form a rectangle.

3. The top corners are bent towards the middle of the sheet.

4. They fit well.

5. One of the lower parts is folded up.

6. The blank is turned over, similar actions are performed with the second part.

7. The lower part is opened, the headdress is shaped.

Here is such a simple instruction that answers the question of how to make a cap from a newspaper with your own hands. The task is not difficult, even a child can handle it.

Square cap

1. It is necessary to take a sheet of newspaper.
2. One of the corners is bent to the opposite side, forming a square.
3. Repeat this procedure on the other side, while marking the second diagonal.
4. The blank is bent diagonally and turned over with the corner side up.
5. The corners are laid with the bottom side to the wide part of the large triangle.
6. The model is turned over, the previous actions are repeated.
7. If everything is done correctly, then a visor is formed, which must be bent up.
8. To secure the shape, all that remains is to bend the corners.

Conclusion

There are many ways to create origami caps,similar products are original, not similar to each other. They can be with or without a visor, square or round.

The article described just a few options on how to make a cap from a newspaper without using scissors and glue. These methods are available to both adults and children. For kids, making paper hats is an exciting and educational activity, while also getting the right thing.