Table of contents:

How to make a cat house from newspaper tubes
How to make a cat house from newspaper tubes
Anonim

Pets love to lie down in a cozy place. A cat house made of newspaper tubes will be an excellent budget solution. To make, you will need newspapers, glue and a little patience. This homemade house will become your kitty's favorite place.

Materials

A cat house made of newspaper tubes is a good solution for any interior. It is economical, does not require the preparation of expensive materials.

weaving from newspaper tubes house for a cat
weaving from newspaper tubes house for a cat

House benefits:

  1. Minimum cost.
  2. Making a bed of any shape and size.
  3. Will be a great piece of furniture.

Materials:

  • newspapers or glossy magazines;
  • PVA glue;
  • ruler;
  • pencil;
  • knitting needle or wooden skewer;
  • scissors.

The house can be painted in any color when it is ready. To do this, you need acrylic paints.

How to make tubes

First of all, you need to prepare a newspaper. It is cut into identical strips 10 cm wide. On average, with one turn of the newspaper, 5straws.

How to twist:

  1. The needle is applied from the narrow side at an angle of 45 degrees.
  2. Tightly pressing the newspaper to the stick, twist along the entire length.
  3. At the end, fix with PVA glue.
  4. Let the straws dry well.

The quantity depends on the size of the product. You will need at least 500 pieces per pet bed.

How to make a cat house out of newspaper tubes

Homemade house is an economical option. Straw products are strong and durable.

cat's house
cat's house

What you need for the house:

  • thick cardboard;
  • paper straws;
  • glue;
  • scissors.

Step by step weaving a house for a cat from newspaper tubes:

  1. Prepare the necessary materials.
  2. Wind at least 500 tubes. Let them dry.
  3. Cut out 2 pieces for the bottom of the house from thick cardboard. This will be the basis for weaving. The diameter of the circle is calculated as follows: the size of the cat plus 7 centimeters.
  4. The tubes are glued to the inside of the bottom so that they form rays. Attach the second part of the base from above.
  5. The walls of the house for a pet are braided along the frame. On one side, they leave a hole for the passage of the cat.
  6. First weave the walls in a straight line, like a basket. At a height of about 5 cm, the place for the door recedes, braided in reverse rows.
  7. You need to weave tightly so that the design is stable.
  8. If desired, the house is covered with food coloring. Alloweduse stain, but be sure to dry and ventilate the product well.

The house can be made in the form of a sunbed, a basket with a small roof. It is recommended to sew a soft pillow at the bottom so that the pet can sleep comfortably.

Recommended: