How rocket models are made

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

Today we will tell you how do-it-yourself paper rocket models are made. Schemes of such aircraft will be described in detail below. Sometimes there is an urgent need to do something extraordinary and fun, without resorting to dreary and costly pastimes. Especially such a burning desire arises when one's own fidget children are whining and languishing with boredom. In such a situation, the ability to pile a miraculous toy in artisanal conditions is very useful so that fun in your house is in full swing. And specifically, paper models of rockets will help us. There are many ways to build your own "star pegasus", so we will now bring you up to date and show you what and how to do.

First way

To get rocket models, you should prepare everything you need. Materials needed: one sheet of paper, electrical tape, scissors, straw(in order to start the starship) and a glue gun (although the usual PVA is suitable instead, but with this choice you will have to be patient, because everything will dry for a long time). The first thing to do is to cut the leaf into two parts (about 5 cm wide each). Next, get a tube. It is best to disassemble the ballpoint pen. Then attach a piece of electrical tape to one of the halves of the "operated" sheet, turn this part over and cover the handle. Something like the body of the desired rocket will come out. Secure the paper twisted around the handle with electrical tape “solidly”, and then pull out the writing instrument. If there are bumps on the tips, just remove them with scissors. Now one of the ends of the body should be clogged with the same electrical tape. You need to prepare three pieces of duct tape and fold them in such a way that you get stabilizers for your device. One of the pieces must be carefully folded in half, but not completely glued together. Next, with the help of scissors, by eye, we cut off the tape at an angle equal to approximately 45 degrees. We do everything in such a way that the result is a triangular shape of the stabilizer. With the rest of the prepared pieces of adhesive tape, we perform the same manipulations.

Attach the stabilizers to the rocket with small pieces of duct tape. They should be attached at equal distances around the base of the spacecraft. Now we take the remaining piece of the sheet in our hands and give it the appearance of a cone, which is perfect for the body. We cut off as unnecessary part of the nose segment of the rocket. We wrap the cone with electrical tape so that it is properly prepared for long flights. Be especially careful with the tip of the nasal fragment. About ¾ press the glue into the cone. Place the rocket body in the cone with the sealed part. Wait a while for the details to get a good grip. It's done - the means of entertainment is made. It remains only to start it, for which you simply need to insert the tube from the handle into its body, hold it and blow as hard as possible.

Cardboard

We continue to make rocket models. Such a version will be able to outdo its paper counterpart in all respects. Materials that will be required in the manufacture: cardboard tube, colored paper and scissors. You can use pencils with felt-tip pens, and other cosmetic tinsel. But this is a purely individual aspect. The beginning will be laid by manipulations on colored paper. It is necessary to carefully cut out a quarter of a circle from it with scissors. We make a cone from the resulting one, trimming it a little, if necessary, and apply a couple of cuts. It's time to glue this cone to the cardboard tube. The resulting rocket is decorated in many ways. Any device of this class will clearly benefit from a pair of wings. So you need to cut them out and add them to the rocket. Do not forget about the valves for fastening (cuts). Once the wings are in place, the job is done.

Bowl

Such models of rockets are an excellent solution for conscientious parents who want to spur the development of their child's imagination. Asbasics come in handy disposable deep bowl. Make a cylinder of foil, then to pile a rocket out of it, relying on the first creation method. Get paper and make a tube out of it. Then make a hole in the bowl, the diameter of which is equal to or slightly larger than that of the tube. We thread a paper tube into the hole, fixing it with adhesive tape for greater durability of the structure. The thing is small: we just put the rocket created according to the first method on the tube and blow hard to make the device soar.

Tissue Paper

Next in line, we have fairly easy rocket models. For the next craft, the body and stabilizers are made of colored paper, and the parachute, which serves as the main help for the descent, is created from cigarette paper. We find a leaflet measuring 177 x 250 mm and transform it into a simple cone. In order to make things easier for yourself, it is better to stretch the paper between the table and the ruler. Lubricate the edge of the cone with glue and fasten it. It is better to work on the template for the base of the cone, as this will be very useful when cutting the rocket body. We put the template on the cone, mark the line with a pencil, then get rid of the excess with scissors. Now it's up to stabilizers. We need 3 sheets of thick and colored paper 8 x 17 mm. We refract each sheet in half lengthwise and impose on each template. Outline with a dotted line, along which we cut out the stabilizers.

We protrude the edges of the stabilizers and connect them thanks to the bonding properties of the glue. These stabilizers will give the missiles stability during flight. On the above template, we outline3 points. Due to the template and pencil marks, we make points on the aft segment of the rocket, and then connect them to the nose of the rocket. We fix the stabilizers, based on our own designations. It's time to tackle the parachute canopy.

Remembering tissue paper. The main thing is that its size should be 280 x 280 mm. By simple manipulations create a dome. Next, we make loops from the threads. You need 8 pieces of equal size. Here it would be better to carefully calculate: we calculate 1.5 the length of the diameter of the parachute dome and add the length of the rocket body to the resulting number. We fasten the hinges to the dome. To do this, it is better to enlist the help of paper patches. Scrupulously and delicately fold the dome. We squeeze all the slings involved into the inside of the rocket body - it is best to wield a small hook in this process. We fix the second knot on the rocket nose, this time using a thread with a needle. We put the parachute into the aft segment of the rocket. Aircraft completed and ready for use.

Flight

Extremely simple rocket model. We prepare a square piece of paper. We make a mark in the middle with a pencil in the form of a line. Rezhem. On the first strip, we leave two dots: one in the middle of the upper part, the second - in the middle of the bottom. We outline an inclined fold to the point marked on the bottom side, and then we outline the second fold, but in the opposite direction, to the top point. We notice the line of the fold, which passes through the point of intersection of the inclined lines. We make the top of the rocket. We fold the sides to the middle line. It was the turn of the remaining strip obtained from paper. Draw a line in the middle on it. We fold the sides of the leaf to the middle, and stick out the lower corners to the top. It remains to attach one section of the rocket to another. We blow into the upper triangle and observe the graceful flight of our apparatus. Now you know how different models of rockets are made.