Body for a newborn: pattern, description of the process, choice of fabric

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

Body is comfortable and modern clothes for the baby, which has replaced the uncomfortable undershirts. Such a blouse is fixed between the legs of the child, does not ride up on the back of newborns and leaves the lower back always closed in older children who are actively moving. Plus, it makes diaper changes easy.

Bodysuits can be sleeveless, with short or long sleeves, open neck or collar, almost no fasteners or with buttons along the entire length. It is easy to sew such clothes with your own hands.

A bodysuit pattern for newborns with a description of the sewing process will be offered later in the article.

By the way, preparing a dowry for a baby with your own hands is not only a pleasant pastime, but also a way to save the family budget. The cost of a bodysuit for a newborn (from a pattern you can sew one in 1.5 hours or less) is much lower than the price of ready-made clothes.

Choice of fabric for tailoring

The main rule for the first clothes of the baby is natural fabric, external seams, a minimum of dyesand decorative items. The first sets should be comfortable to put on the child, they should not interfere, rub somewhere or cause irritation.

It is best to choose chintz, cooler, footer, interlock, flannel for sewing children's clothes. Chintz is a lightweight cotton fabric, products from which are practically not felt on the body. The flannel is very soft, has a fluffy sparse pile and has heat-saving properties. Flannel bodysuits will be very pleasant to the touch and dense.

Cooler is a thin and durable knitted fabric. Cooler children's clothes will pass air well. Interlock is distinguished by thermal protective properties and strength, it does not bloom much. For sewing warm bodysuits, you can still use a bike.

You will need a slanting inlay for processing sections. The main task of processing is to protect the edges of the product from stretching and deformation. Trimmed garments look more attractive even after long periods of regular wear.

Before sewing a baby bodysuit for newborns according to the pattern, be sure to hand wash the fabric at a low temperature and dry it. Fabric may shrink slightly on first wash.

Ready pattern

Body for a newborn can be sewn according to a standard pattern. For beginners, it may be more convenient not to build a pattern on paper on their own, but to use another method: buy one bodysuit of the style you need to sew and make a pattern according to it.

Body pattern fornewborns with sizes can be found in the article. Here are the size 62 (for large newborns) and 68 (for 3-6 months). The numbers indicate the length of the segment in centimeters.

As for the sizes, sewing the smallest clothes (50-56 cm) is not worth it, although such bodysuit patterns for newborns can also be found. Firstly, children in the first months of life grow very quickly, and secondly, the baby can be born with a body length of 46 to 58 centimeters, so that the smallest bodysuits can immediately become small.

According to this pattern, you can sew a bodysuit for a newborn with your own hands with short, long sleeves or no sleeves at all. Buttons are supposed only between the legs, and not along the entire length of the product.

Transfer pattern to fabric

How to sew a bodysuit for a newborn? The pattern is first transferred to tracing paper or newsprint in size. On each side, leave one centimeter for allowances, and then cut out the front, back and two sleeves of the desired length.

Processing the neck and bottom

For processing the edges, it is convenient to take an inlay with a width of 3 to 5 cm. Knitwear does not require processing with an oblique inlay, because it stretches well, so you can take a straight line for them. The required length is calculated as follows: neck length minus 2 cm.

The inlay should be folded in half with the wrong side inward, attached to the neck and pinned with pins. To make the product look neat, you should first baste the inlay with contrasting threads. Then sew in a zigzag, retreating one centimeter from the edge. Excess fabriccut close to the stitching.

The lower part of the bodysuit for a newborn (back and front) must be processed in the same way. After the sleeves are sewn on, open sections also need to be processed, but in a different way. On sleeves 0.5-1 cm just tuck inside out and attached.

How to sew sleeves

The sleeve should be folded in half, find the highest part of the shoulder. This middle is applied face to face to the shoulder with an overlap. The edges of the sleeves are applied to the edge of the sewing of the sleeves of the back and front. Then the fabric must be evenly distributed and sewn with a stitch.

Sew side seams

It remains only to stitch the side seams. It is very easy to do this. It is better to use a zigzag (goat) stitch, and then cut the fabric close to the cut. By the way, a bodysuit for a newborn according to a pattern can also be made with seams outward. Such clothes will not rub delicate skin and will definitely not cause inconvenience to the baby.

Insert buttons into bodysuit

Buttons in this model can be inserted not only between the legs, but also on the shoulders. This can be done quickly, efficiently and effortlessly with a special tool. It is enough just to fix such tongs on the fabric in the right place and tap the buttons several times with a hammer to lock them into place.

The bodysuit pattern for a newborn is very simple, even a novice craftswoman can handle this job. But what a pleasure it is to sew the first clothes for your beloved baby with your own hands!

It also saves a lotfamily budget. After all, children grow up very quickly, and the expectant mother usually buys a lot of clothes for the little ones, which in the end turns out to be unclaimed. Needlework will help you spend your prenatal vacation with benefit and pleasure.