Table of contents:
- What will the slippers be like?
- Handy materials
- Fur slippers
- Pattern of slippers with backs
- Pattern of slippers made of fur with an elongated shaft
- In closing
2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47
Fur slippers not only look beautiful, but also keep your feet warm in the cold season. They will especially appeal to children, who sometimes simply cannot be forced to walk around the house in indoor shoes. You can buy soft beautiful slippers or make your own. Making slippers with your own hands from fur is not a very difficult task and even beginner needlewomen can do it.
What will the slippers be like?
Before you start making fur slippers, you need to decide how they will look. The easiest way to design ordinary slippers. It will take a little material for this, and the pattern of do-it-yourself slippers made of fur in this case is easy.
You can also make slippers with backs or with an elongated shaft. In such products, even in winter, the legs will be comfortable and warm. True, in this case, do-it-yourself slippers pattern from fur will require effort and patience, and materialneed a little more.
Handy materials
To make a pattern, you need to have at hand the right tools and the material from which the products will be sewn. You will need cardboard for making patterns. You also need to prepare a pencil, scissors, chalk, needles and threads in advance. Often, a pattern of do-it-yourself slippers made of fur is based on the measurements obtained, so you will need a tailor's meter to work.
Fur slippers
After preliminary preparations, you can start building a pattern. Slippers consist of only two parts, so they can be designed in a couple of hours. If a pattern of fur slippers is built with your own hands, it is difficult to guess with the dimensions, so it is better to act according to a long-proven scheme. The master class will help to cope with this work:
- you need to put your foot on the cardboard and circle it with a pencil;
- to the resulting pattern, add 2 cm around the entire circumference;
- a sheet is applied to the top of the foot so that it runs from the toes to the instep;
- in the place of contact with the floor, the sheet is circled with a pencil;
- to the resulting pattern in places where the part will join the sole, you need to add 2 cm;
- details are cut and copied so that the left and right slippers have their own patterns.
When the pattern of fur slippers is made with your own hands, you can proceed to further work. The resulting drawings must be laid out on the material, outlined and cut out.details. Since each part is divided into inner and outer, then for sewing one slipper you will need 4 blanks: 2 for the sole and the same for the top.
To make the slippers warmer, you can make an insert of batting in the sole. It is better to cut it a couple of millimeters smaller around the entire circumference, then after connecting the parts it will be hidden, and the products will turn out beautiful and neat. It is better to cut the outer part of the sole from synthetic or natural leather, which will increase the wear resistance of the shoe.
The final step will be the connection of parts. First you need to fasten the sole and top of the products with pins, stitch the joints and finish the edge.
Pattern of slippers with backs
Products with backs are constructed in the same way as flip flops, but you still need to add a back piece. The pattern of this part can be made in a similar way, by attaching a leaf to the leg, and outline, taking into account the height of the back.
It's easy to make a piece pattern by taking measurements. To do this, you need to measure the foot:
- attach the beginning of the meter to the inside of the foot along the very bottom to the place where the upper part of the slipper will pass;
- grasp the back of the foot with the meter;
- fix the length on the outside of the foot where the top of the product passes.
The height of the back should be no more than 7 cm, then the slippers will be comfortable. Using the obtained dimensions, you need to draw a detail on cardboard, not forgetting to make an increaseon the seams. The resulting pattern is applied to the material, the details are outlined and cut out. First, the upper parts are sewn together and then attached to the sole. For one slipper with a back, 6 parts are cut out (with a heater for the sole, they will turn out 7).
Pattern of slippers made of fur with an elongated shaft
The pattern of fur slippers is a little more difficult to make. The pattern of the sole is created in the manner described above. After that, on the received part, you need to mark the center of the heel and measure the leg around the entire circumference. A rectangle of the previously obtained length and arbitrary width (up to 7 cm) is drawn on paper. This will be the side of the slipper. The length of the foot is measured before lifting, and the resulting measurement is indicated on the sole, starting from the center of the toe. A line is drawn along the width of the sole. Along this line, the part is bent and transferred to the material: this will be the upper part of the slipper.
Using patterns, you need to cut out the details of the future product. First, the top is connected to the side part, and its length is measured along the upper circumference. This measurement is needed to calculate the width of the shaft, the length of which is taken arbitrary. All dimensions are transferred to paper, and a rectangle is drawn. This will be the elongated top of the slipper-boot. The shaft is attached to the previously made top, which is sewn to the sole. Finally, the back seam is sewn. When constructing a pattern, do not forget about seam allowances. For fur products, it is better to make them at least 2 cm.
In closing
Making a pattern of fur slipperseasy with your own hands. If, however, there are difficulties, or there is no desire to mess with measurements, you can find patterns in various magazines. But there is an important point that is worth remembering: a life-size pattern of slippers made of fur will allow you to sew products that are the most suitable in size. Having made indoor shoes with your own hands, you do not have to spend money on buying them. After all, you can give a second life to a fur coat or a sheepskin coat that has been gathering dust in the closet for a long time.
Recommended:
Cutting: the history of occurrence. Corrugated paper and napkin trimming technique: master class
The end-to-end technique allows you to create wonderful fluffy carpet-pictures of various shapes and sizes that arouse interest and a sense of admiration. It seems unlikely that such seemingly complex applications can be performed by children. Everything is possible if the work of the team is properly organized, and even first-graders can cope with the most complex drawing
How to make knitted tank slippers with your own hands? Tank slippers: crochet pattern and master class
Choosing a gift for a man is a very complex and lengthy process. If you know how to knit, then the problems become much less, because with your own hands you can make an original surprise that will appeal to any member of the stronger sex. The main thing is desire, patience and perseverance. Do-it-yourself slippers-tanks will appeal to both small and adult men in your family
Pattern of slippers with your own hands. How to sew children's house slippers with your own hands?
Shoes such as slippers are relevant at any time of the year. In summer, the foot in them rests from sandals, and in winter they do not allow to freeze. We suggest you make homemade slippers with your own hands. A pattern is included with every tutorial
Crocheted slippers: diagram, description. Slippers crocheted from squares: pattern
Home slippers always attract attention. They can be made from a variety of materials. Products that are made by hand always look original. In this article we will talk about how to crochet slippers. A diagram of some products will also be presented. You will definitely pick up something for your family members
DIY slippers pattern: how to sew slippers
From this article you will learn how to make a pattern of house slippers with your own hands. Slippers should be light, soft and beautiful. In order to sew warm house shoes, you need to make a pattern of house slippers made of fur or plush