How to make a helicopter with your own hands?
How to make a helicopter with your own hands?
Anonim

Who hasn't dreamed of owning a radio-controlled helicopter in their life? Most likely, there are few such people. But why buy when you can make your own helicopter?

This type of model is highly valued not only among the children's half of the population, but also among adults who will never refuse to feel a few years younger. In addition, if it was decided to make a helicopter yourself, you won’t have to spend money on buying it.

DIY helicopter
DIY helicopter

In principle, the process of creating a helicopter is not very laborious. In order to create a radio-controlled helicopter with your own hands, you will need to purchase materials such as construction foam, a power unit, adhesives and paints. In the process of creating an aircraft, you will need to design a special drawing. The whole process can be divided into the following steps:

do-it-yourself radio-controlled helicopter
do-it-yourself radio-controlled helicopter
  1. First, you should purchase a special foam, the thickness of which will reach 30 millimeters. Also, do not forget about the design of the drawing. This can be done both independently and found in the literature. Independentdesign involves creating a drawing in three different views.
  2. To create a helicopter with your own hands, you will need to install the engine. It must be mounted at the same time as the screw. Along with the engine, you will need to buy a battery, the capacity of which determines the duration of the flight.
  3. In the process of creation, you will need to purchase a large number of additional parts. It is better to buy them in stores specializing in the sale of spare parts and models of this type. In addition, in such establishments you can always consult on a question of interest.
  4. In order to create a radio-controlled helicopter with your own hands, you should transfer the project drawing to a sheet of foam. Having circled the templates and cut them out with a cutter, you need to start gluing them together. You can do this with super glue. After all work is completed, the surface of the finished helicopter model should be treated with fine sandpaper. This procedure will create a neater appearance of your aircraft. The joints should be reinforced with a special insulating tape. The wings of the future model should be fixed from their underside.
  5. It is impossible to create a helicopter with your own hands, which will also fly, without additional parts and electronics. They should be mounted according to the instructions. The power unit is mounted on a special frame made of wooden planks.
do-it-yourself radio-controlled helicopter
do-it-yourself radio-controlled helicopter

The final touch in the creation of the helicopter is its decoration. To do this, writemodel with coloring means, relying on your imagination and creativity. As you can see, making a helicopter with your own hands is not as difficult as it seems at first glance. It should be understood that in this case care and accuracy will be required, otherwise the radio-controlled aircraft will not fly.

Recommended: