Apron for florist: ideas, description, patterns

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

The amazing and vibrant world of flowers fascinates with its beauty and intoxicating aromas. Working with live plants requires creativity and creativity from florists. But, as in any business, you need special equipment. A florist apron will help protect your clothes. Bouquets do not have strict requirements for appearance.

Why do we need overalls

A florist's apron can be of any color, style and made of any suitable material. It can be decorated with a company logo or other elements.

An apron for a florist, the photo of which is presented in the article, must be made of durable fabric that does not allow moisture to pass through. Another important aspect: it should have pockets for work equipment. A florist needs scissors, tape, ribbons, pruners and other tools that should always be at hand to optimize the workflow.

Materials

The apron should be made of durable fabric, because even onthe most beautiful plants may have thorns and sharp leaves. It should not restrict movement. The apron should have convenient fasteners or ties.

To make the apron waterproof, you can use a special lining. As a basis, you can choose a thin tarpaulin, raincoat fabric, jeans, linen or synthetic materials.

Buy or sew

If you need a lot of aprons for florists, you can buy ready-made ones in stores. But if the company is small, then it would be more expedient to order in an atelier or sew it yourself. Work on such a product will not take much time. If you make an apron for a florist with your own hands, you can take into account the features of the figure and other nuances and wishes.

Fabric calculation

You can sew an apron with and without a bib. Depending on the style, the amount of fabric is calculated. If the width of the canvas is 70-80 cm, then a cut equal to twice the length of the product is required. With a fabric width of 120-140 cm, one length of the product is sufficient.

The material is taken with a margin, which is needed for cutting out pockets, ties, a belt and other decorative elements.

Measuring

To sew an apron for a florist, you need to take measurements and make a simple pattern. The main measurements are the circumference of the hips and the length of the product, which is measured from the waist.

If the apron is with a bib, you need to measure the height of the chest part.

Apron without bib

Product should wrap at least half of the figure along the hip line in order to effectively protect. You can find out the width of the product by measuringhips and dividing this figure in half. If you need a wider apron, you need to take this into account when measuring. You will also need a measure of the length of the product. It is convenient to work in an apron that is knee-length or slightly lower.

On paper, build a rectangle that will be half of the product.

For cutting, fold the fabric along the shared thread. To save material, this should be done not along the center line of the cut, but at half the width of the apron. When cutting, you need to add 2 cm on each side for allowances. Cut out a belt from the remaining fabric, which is cut along the shared thread. The width of the belt is 3-4 cm, and to find the length, you need to add 30 cm to the width of the apron on each side. The belt consists of 2 identical stripes.

Also don't forget the pockets. They can be made rectangular by adding 1 cm for allowances on the edges and 2 cm on top.

Now you can start sewing. Bend the side edges of the apron and sew on the machine. Fold down and hem as well. Mark the location of the pockets. Before attaching them to the base, you need to fold and stitch the top edge of the pocket, and fold the remaining sides inward and iron. After that, they can be sewn to the product.

It remains to sew the belt. Next, you should grind the details of the belt along the length on one side and sew along the width of the ties. Turn right side out and iron well. Mark the center of the belt and the center of the apron. Connect both parts and sew them manually with a basting stitch. After that, sew on a typewriter. If the apron is for a slender girl,then 10 cm from each edge of the main canvas you need to lay small folds.

The product is ready.

Apron with bib

If you need to protect the upper body, you can make a bib. It can be one-piece or sewn separately. Its shape can be rectangular, in the form of a trapezoid or fantasy.

Cutting an apron with a separate bib differs from the option described above in that the shape of the upper part and the ties for it are cut out. It is sewn on after attaching the belt.

If the product is one-piece, then you must first build an apron pattern for the florist. First, a rectangle is built (as described above), on which the length of the product and half the width are deposited. The pattern is built on half of the product. From the center point, set aside the height of the bib. Draw a line equal to half the width of the bib (10-12 cm). Connect the extreme points with a pattern or ruler. The cutting of the product is carried out in the same way as in the previous version.

When sewing, the edges of the apron are first processed. Sew on pockets and ties. And then the belt is sewn on. Ties around the neck can be made adjustable in length using buttons or rings, moreover, such details will become a decorative decoration.

Creative option

To work with home flowers, you can make an apron from old jeans. You need to leave the belt and back pockets, and cut off everything else. This accessory is worn at the waist with pockets forward.or on the side - whichever is more convenient.

An apron for a florist should help in a creative search. When everything is at hand, nothing interferes with the work.