Make a big bow from a satin ribbon with your own hands

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

The most common accessory for decorating clothes or hairstyles is a bow. They are unusually diverse in appearance, manufacturing method, material and finish. Needlewomen are constantly inventing the latest types and techniques for their creation. Try your hand and create a real miracle for your princess!

Tools and materials

Bows can be made from absolutely any available material. For such purposes, various ribbons are excellent - satin, rep, organza, brocade, etc. You can experiment endlessly, using everything that is available for work! Accessories are also suitable for any - lace, sewing, beads, beads, that is, everything that your imagination is enough for!

Satin ribbons are the most popular material used to create hairpins. Brilliant smooth texture, low cost - all this attracts craftswomen. Bows of various sizes and types of them are very beautiful.

These ribbons come in different widths, and the color palette is huge!The choice of working material is very large, it is possible to create a bow from a satin ribbon with your own hands for every taste and color.

Also you need to work:

• needles;
• threads matching color;
• glue;
• a little thick fabric - for fastening to elastic bands or clips;
• beads, rhinestones.

Big DIY satin ribbon bow with step by step photo

To make a lush large bow, make templates from thick cardboard. Below are three sizes, but you can make them bigger or smaller. Ribbon width - according to your desire, but 2.5 cm is better. For a medium-sized bow, two meters will be enough, if you want to get a more voluminous product, add another meter.

At the beginning of the process of making a large school ribbon bow with your own hands, you need to wind it onto a cardboard template. The coils should not be made too tight, otherwise your bow will be sloppy.

Then sew all the layers in the middle and remove from the cardboard.

For more convenience, you can make cuts along the edges - where you stitched with threads, but this is optional.

Next, disassemble all the resulting loops, straightening.

Cut out of dense matter (for example, take felt) a circle smaller in diameter than the resulting bow, and glue it on the bottom. You will need to attach a clip or rubber band to it.

So you made a big DIY satin ribbon bow!

Bows for hairpins

The hair band is the most necessary thing for girls. Creating them yourself will not be difficult. So how to make a bow from satin ribbons with your own hands? Step by step photos and description can help you with this!

You will need 64 cm of a narrow ribbon (for example, red), 55 cm of white and 55 cm of blue.

To begin with, cut out blanks from cardboard that will greatly simplify your work. These are "stars" with diameters of 7 and 6 cm.

Insert a red ribbon into the middle of the larger workpiece, bringing it to the opposite side from the work. After turning the cardboard with the tape over, start wrapping the corners with the ribbon. Do this in order on each clove, without skipping them. At the end, sew down the middle with a few stitches.

Do the same manipulations with white and blue ribbons and a smaller "asterisk".

For the middle, you can use large beads, sew-on or ordinary rhinestones.

So let's assemble our bow. We stack blanks on top of each other in the following order: white, blue and red. We sew them in the middle, and glue the decorative center on top.

It remains to sew on an elastic band for hair and seal the fastener with tape.

Small bows to decorate everyday hairstyles

Now we will make small bows suitable for rubber bands, clips or braid tapes.

Purchase a satin ribbon about 1.5cm wide.

Wrap it on a cardboard template in 4 layers, securing the ends in the middle.

Walk smallstitches and pull off the thread.

Decorate with small beads on top, glue rhinestones.

Make several of these bows and attach them to a long ribbon that is woven into the braid, leaving the bows outside. Or you can glue them to invisible or thin elastic bands that match in color.

Double bow

Making a double large satin ribbon bow with your own hands will also not take you much time.

To do this, you need to stock up on a ribbon, you can take 2 shades that match each other, a decor for the middle and a mount with which it will stick to your hair.

Cut 2 pieces of ribbon of the same length, connect the ends of each into a ring. Now sew them in the middle and pull off the thread.

Then it will be necessary to glue them together with the lower and upper parts.

The middle can be closed with a piece of ribbon or a beautiful button.

You made a big bow from a satin ribbon with your own hands, it remains to glue the clip - and that's it!

Variants of this bow will be the overlapping of ribbon rings on top of each other, a triple bow and so on!

Invent, fantasize, and wonderful accessories will turn out one after another. Of course, nowadays there is no problem with buying hairpins in stores, but unique things are always better!