Table of contents:

How to make a lampshade with your own hands?
How to make a lampshade with your own hands?
Anonim

There are situations when old interior elements are not quite suitable for a new renovation or are tired. This can happen with table lamps, chandeliers and floor lamps. But buying new ones means allocating significant funds from the family budget. You can easily save money at this event if you make a new lampshade with your own hands. For these purposes, anything can come in handy. And how to do this, we will analyze further in the article.

Updating the old

DIY fabric lampshade
DIY fabric lampshade

Let's say that you have a lamp with a lampshade, but it does not quite fit the interior. You can solve this problem with a piece of fabric or wallpaper that was used during the repair.

To make a DIY lampshade, measure the old piece and cut out the required piece of new decorative material for it. After that, just glue it to the old lampshade. This can be done in a matter of minutes, but the effect will exceed all expectations. The main thing is to do all the work carefully so that unnecessary folds and traces of glue do not appear.

To the travel room

do-it-yourself lampshade from the map
do-it-yourself lampshade from the map

A person who likes to travel to different cities andcountries, there are always a couple of old tourist maps. They can be used in room decor. For this, creating a lampshade for a table lamp with your own hands is perfect.

The work process will be the same as in the previous case. You need to cut the card to the size of the lampshade and glue it. But you can be a little creative. Cut some cards into pieces and make an appliqué out of them. This will create not only an original interior detail, but will also be a good reminder of those days when you were happy in a particular city.

Unnecessary tinsel in the house

do-it-yourself lampshade from buttons
do-it-yourself lampshade from buttons

In the sewing box of every housewife there is always a handful of unnecessary buttons that are in reserve in case "what if it comes in handy." This moment just came.

Get your hot melt adhesive and all your buttons and get creative. You need to glue them to the lampshade randomly, so that the impression of slight negligence is created, as if they crumbled onto its surface and remained hanging like that for many years.

If you are a perfectionist, you can do it differently. Come up with some kind of pattern in advance and follow it in updating the lamp. It also looks quite stylish and unusual. Such a hand-made lampshade will definitely give you a lot of positive emotions.

There is another way to use buttons. From them you can create a picture. The most obvious option is flowers. It will be easy to catch a flowering meadow from round multi-colored elements of different diameters. And if you want even morediversify the drawing, you can lay out any figures on it: animals, clouds and the sun, a river, trees, fruits. If the drawing requires it, make additional elements with acrylic paints: they do not fade from light and do not flow from wet cleaning.

For creative people

do-it-yourself lampshade from pencils
do-it-yourself lampshade from pencils

If creativity is your second self, then express it in your interior. For example, take long pencils and glue them to the lampshade of a table lamp. But in this case, you need to take into account several nuances:

  1. If you glue sharpened pencils, there is always a small chance of getting hurt on them. So keep this in mind, especially if there are small children in the house.
  2. This lampshade will not transmit light well, which means that it can be used exclusively for additional lighting. Turning it on to read a book is not worth it, as there is a high probability of a heavy load on the eyes.
  3. Pencils should be placed depending on the artistic idea. This may be a random sequence or a repetition of the color spectrum of daylight rays.

Now you already know how to make a lampshade with your own hands, but these are not all options. Let's continue.

For winter evenings

do-it-yourself lampshade from an old sweater
do-it-yourself lampshade from an old sweater

You should have a knitted sweater in your closet that has already lost its appearance and you do not wear it. So why not "warm up" an old lamp with it. Select the desired part on it and cut it according to the size of the lampshade. Loose edgesneed to sew.

Now take hot glue and glue the "new clothes" on the old lampshade. The edges need to be folded over and glued on the back. If a piece with an elastic band is used for work, then one of the edges can be left without a fold. In the same style, you can make a vase, which next to the lamp will be a winter bouquet.

If you don’t have a suitable sweater, but you know how to knit and found the remnants of yarn, then you can easily make the necessary “cover” yourself to update this interior detail. You can also create a lampshade for a floor lamp with your own hands.

Forest mood

do-it-yourself lampshade from sticks
do-it-yourself lampshade from sticks

This idea will appeal to those who seek to use as many natural materials as possible in their home. It is better to decorate a lamp with a frame under the lampshade in this way, but it is better to remove the old cover. This way you get interesting shadows on the walls and furniture.

When going to a forest or a park, measure the length between the upper and lower rings of the frame in advance. This will allow you to prepare the right number of sticks of the required length. Their diameter may be slightly different, as well as the length is not ideal. You will only benefit from this in a decorative effect.

When all the material is prepared, take hot glue and start laying the sticks on the frame. Make sure that you do not have some kind of system, because any symmetry is tiring. In this way, you can make a lampshade for a table lamp with your own hands in 30-40 minutes, except for the time to search for material. But you didn’t go to the park on purpose, butjust got out for a walk and along the way prepared the necessary sticks.

If you still have materials left at the end of the work, make an interesting vase out of them. Any cylinder can be used as a template. Cut them into small pieces and lay them out in a circle in a checkerboard pattern or with a slight offset. In such a vase, fresh flowers will live for a couple of minutes, but a winter arrangement or an artificial bouquet, for example, from autumn leaves, will last for quite a long time. If you want the product to hold water, then paste over an ordinary vase with chopsticks.

Setting up napkins

do-it-yourself lampshade from napkins
do-it-yourself lampshade from napkins

This is a rather original and unusual idea for those who have a lot of crocheted grandmother's doilies at home, or craftswomen who can make them. For work, we need just a few of these products. And the more different they are, the more interesting the final result will be.

Dilute PVA glue with a little water and dip our napkins into it, they should be well saturated with the composition. Then inflate a large balloon and lightly grease it with vegetable oil or petroleum jelly. It will act as the base for the lampshade, so the napkins should not stick to it.

Now put our decorative elements on the ball. Determine the order yourself. The main thing here is that they lie one on one. This will add the structure of the fortress. When the work is finished, leave it for a day in a warm, dry place. It should grab and form into a ball.

At the last stage, you need to remove the workpiece from the base. Some masterclasses recommend punching the ball right away. But you should not do this, since the fabric could still stick to it in some places. If the ball is sharply blown off, the product may be deformed. To begin with, walk along the entire plane of the glued surface and, with simple indentations, check how securely the napkins have grabbed the ball. If this happened somewhere, then first tear off the fabric from the rubber with the same pressure. Now gently deflate the balloon and you will see how you managed to create a lampshade with your own hands. You can hang it instead of a chandelier in your room.

Lamp made from plastic bottles

handmade lampshade from bottles
handmade lampshade from bottles

Have you noticed that the bottom of a bottle of sweet water or mineral water resembles a flower. From these elements you can create beautiful decor elements. Cut off the bottom of the bottles and fasten them together. For these purposes, it is better to use a stapler, since hot melt adhesive does not always reliably adhere to plastic.

You should end up with a balloon-like design. Be sure to leave a small hole in it so that you can put this work of art on the lamp. But remember that you need to choose a light bulb for such a hand-made lampshade for a table lamp that does not heat up. Otherwise, the structure will melt, and the likelihood of a fire will rise significantly.

Conclusion

Now you know how to create a lampshade with your own hands. These are not all ways. You can come up with something of your own by reading this material. But always remember that the lampcan be a source of additional heat. And to avoid a fire in the house, always follow the safety rules and remain prudent even in the implementation of the most unusual ideas.

Recommended: