How to weave an owl from rubber bands on a loom, on a slingshot, on a hook?

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

Sometimes needlewomen want to do something unusual, somehow decorate their bracelets in order to surprise and please others with their crafts. One of the most popular decorations is an owl figurine made from rubber bands.

The owl is considered a wise and majestic bird. An amulet or bracelet with an owl woven from elastic bands can give yourself strength and wisdom. It is not difficult to create a real amulet against many misfortunes with your own hands. So, how to weave an owl out of rubber bands?

Determining the nature of crafts

Interested in how to weave an owl out of rubber bands? To weave a small owlet, use a classic loom or a small Monster Tail device. You can make an owl with a slingshot or fork. To weave a voluminous owl from rubber bands, use the crochet technique - lumigurumi.

How to weave an owl on a slingshot out of rubber bands?

Beautiful and cute toy can be woven with a slingshot. The owl can be used as a keychain. For work useelastic bands of any color, but experienced craftswomen advise choosing brown and gray shades. What might be needed? In process use:

• special slingshot;
• removal hook;
• red elastic bands (main) - 44 pcs;
• white elastic bands (for weaving the abdomen) - 8 pcs;
• orange (for making a beak and paws) - 4 pcs;
• black (for making a peephole) - 2 pcs.;
• scissors.

Doing work

Many are interested in how to weave a figure out of rubber bands. An owl on a slingshot is woven in two steps. First, they prepare elastic bands for the body of an owl, weave it according to the pattern, and then move on to the head.

Weaving the body

The first red elastic should be thrown in three turns on the right column. Then put two redheads on two pins. After that, the initial gum of three turns is thrown off to the center. Release the right column - transfer the rubber bands to the left side).

Weave a foot

One orange rubber band wraps 4 times on the right side of the slingshot. 2 redheads are put on as usual. The orange of 4 turns should be lowered onto the rubber bands. From the left column, the bottom 2 pairs should also be sent to the center so that the orange one is to their right. After that, 2 redheads are thrown again, and the lower ones are sent to the middle. The second pair of redheads is put on 2 columns, the lower ones are sent to them. The third pair is thrown on both parts of the slingshot, the lower ones are thrown into the center. Then the gum should be transferred from the left side of the slingshot to the right. The hook is then inserted intoan initial elastic band of 3 turns, after which it is thrown over the left column.

Weaving the belly

Throwing on 2 white elastic bands, we send a triple elastic band to the middle. The second white pair is put on in the same way, the lower whites descend from the columns. The third and fourth pair are also woven. White elastic bands are transferred from the left side to the right. The hook is once again inserted inside the initial triple elastic band, which is put on the left pin.

Next, 2 red elastic bands are put on both columns, 3 turns on the left are sent to the center. The left rubber bands are transferred to the right, four turns of orange rubber bands are wound onto the left pin. They put on a couple more redheads, after which the orange one is lowered from the pin.

From the right column, you should throw off the top 2 pairs of redheads so that the orange one is left on the left. Then 2 redheads are put on, and the previous ones are sent to the center. They put on a pair of redheads again and lower the previous ones from both columns. The next pair is worn in the same way, with the previous ones discarded from the columns.

With the help of the next pair of red rubber bands, they connect everything together, i.e. a pair is worn on both parts of the slingshot. The lower elastic bands are sent from the slingshot to the middle of the weave.

Weaving the head

Elastic bands should be laid out in the form of a diagram. A pair of redheads from the right row is put on in the usual way, the lower ones are thrown off in the middle. Then another pair is put on, and the bottom ones are again sent to the center. The left rubber bands should be moved to the right.

Weaving eyes

The black rubber band is thrown in 4 turns on the left pin. Again, a red-haired couple is thrown over and black elastic bands are removed in 4 turns. Both lower pairs are also sent on the right, but in such a way that the black one is left on the left. Then 2 more red elastic bands are thrown on, while the lower ones are sent to the middle.

After that, you should release the left column, transferring the rubber bands from it to the right one. The hook is inserted into the loop from which the weaving of the head began. 2 orange loops are thrown on the hook. The second part is pulled through the loop and also thrown onto the hook, from which orange loops descend onto the left pin.

Next, a pair of red rubber bands is put on both columns, orange ones are removed from them. Rubber bands are transferred from left to right. The hook should again be inserted into the initial loop, put a pair of red loops on the hook, stretching one side and putting the other on the hook. Elastic bands should be lowered from the hook to the left column. Put on 2 red loops on both columns. 2 pairs of redheads on the left to descend to the work center.

On the right column, pick up the 2 upper elastic bands and transfer them to the left. Throw the black 11 elastic band in 4 turns on the right side of the slingshot. Next, a pair of red rubber bands is put on both columns and black turns go down. From the left side of the slingshot, all the rubber bands are thrown off so that the black one is on their right. Wearing a pair of redheads, the previous ones should be sent to the middle.

Next, all the rubber bands on the slingshot should be connected, one redhead should be put on two posts, all the rubber bands from the slingshot should be sent to the center. Next, one of the rubber bands is transferred to the adjacent column. The bottom goes down to the center. The loop should be tightened well.

Weaving tassels

The hook is inserted into the upper left loop of the head and one red elastic band is pulled through it, a loop is made. The same is repeated on the left side. Next, pull each of the prepared elastic bands and cut about half with scissors.

How to weave an owl from rubber bands on a loom?

This method is considered by craftswomen to be the simplest of all known. But not everyone knows how to weave an owl out of rubber bands using a machine. To do this, first you need to choose the elastic bands of a suitable color for making an owl, and then proceed according to the scheme: sequentially throw the rubber bands on the corresponding columns of the machine.

Then the elastic bands are thrown off the column and intertwined. The process of weaving an owl on the loom consists in throwing off and throwing on rubber bands. As a result of the steps taken, a wicker toy is obtained: after being removed from the loom, the elastic bands are pulled together. The owl is ready!

3D Rubber Owl

Many are interested in how to weave a 3D owl out of rubber bands. To do this, use the technique of weaving lumigurumi. This is a very popular technique for weaving various figures and bracelets from rubber bands, which is based on amigurumi.

The difference between these Japanese types of needlework is that amigurumi is knitting toys in a circle using a hook and thread, while lumigurumi uses a hook and elastic bands. How to weave an owl from elastic bands on a hook using the lumigurumi method?

Movework: weave the main detail

In the process of weaving you will have to use:

• with rubber bands of different colors;
• crochet;
• toy filler.

According to experienced craftswomen, such a toy is woven quite easily, it does not take much time to make it. A significant advantage of this method is that one whole piece is woven, consisting of the body, head and ears. The exceptions are the wings, eyes and beak of an owl. Work begins from below, for this, a special ring of six loops is formed with the help of green rubber bands.

In the second row, the weaving should be slightly increased, so twelve elastic bands are woven there, two through each loop. Then again you need to add, but through one loop. Green elastic bands need to weave one row with an increase. The result should be 24 loops. The row is woven with an increase in every third loop.

The next row is woven without adding, just weave 24 elastic bands in all rows. Since the owl should be striped, the elastic bands should be changed every two rows. In total, sixteen rows should be woven.

How to weave eyes?

To do this, you will need white and black elastic bands. First you need to make a ring of six black loops. Further, one row is woven, two white ones in each loop.

How to make a beak?

Three times you should throw an orange elastic band on the hook, and then place it on two of the same elastic bands. One end should be left freehanging down. Next, another pair of elastic bands is threaded, hanging elastic bands are returned to the hook. Another pair is thrown on the hook, which is pulled through the first two loops. Rubber bands are going to one.

The eyes are sewn on with a regular seam, using elastic bands of any of the available colors.

To attach the beak, first pull one end of the elastic inward, and then stretch the other end, stepping back the loop, and fix it inside with an orange rubber band.

Wings

To weave the wings of an owl, you need to form a ring of six green rubber bands. Next, you should weave two rows of twelve elastic bands, making an increase in each loop, while the color must be changed every two elastic bands. Attach the wings at the end.

Final steps

At the last stage, the owl is filled with padding polyester and the head is sewn together. The ears will form on their own. In the corners, stretch three orange elastic bands, making knots out of them. The rubber bands are cut to form tassels.