Origami from modules: ideas, diagrams for beginners
Origami from modules: ideas, diagrams for beginners
Anonim

The origami figures from the modules look very impressive. If you have never tried to collect three-dimensional flowers or animals from individual elements, then be sure to try it. Our article is designed for beginners. Here you will learn how to make origami from modules according to the schemes, how to prepare the triangular corners themselves, how to connect them together in different ways. Photos and step-by-step instructions make it easy, so get your double-sided thick paper ready and let's get started together.

How to fold paper module

Origami from modules is assembled from separately twisted elements. These are small pointed corners with pockets for connecting parts together. How to fold them from a piece of paper, read on. The step-by-step photo shows the sequence of actions.

how to make origami modules

A sheet of A-4 paper is folded in half several times to form small rectangles. You should get 16 parts. They are cut along the folds of paper, and work is done on each element according to the scheme. Origami from modules always begins with the manufacture of a large number of small parts.If you plan to make even a small figure, then prepare at least 300 modules. Then, if not enough, they can easily be rolled up again. It is better to prepare the modules in advance, so that with fresh energy you can only deal with the creation of a character figurine.

How to make a long connection

Origami from modules for beginners can be started with training exercises. Connections are of two types. First, you need to learn how to make a long and thin strip, from which you can create a neck for animals or birds, hands for people or fairy-tale characters, make circles, connecting the last module with the first. Secondly, it is necessary to understand the principle of connecting parts in height and width in order to create three-dimensional compositions. Let's see in the photo below how to achieve this.

how to join parts

If you look at the module, you will understand that it has sharp corners on one side, and two pockets on the opposite side. To connect the parts in a long strip, two corners must be inserted into two pockets at the back of the module. Insert the next one in the same way until you achieve the required length. If you need an even part, then the models are connected simply one after another. If you need to create a bend, for example, the neck of a swan, or a semicircle, then the shape necessary for the character is given. If you need a full circle, then the first and last parts are interconnected. You need to act carefully and connect the modules tightly so that they do not fly out.

How the parts are connected in width

Explaining how to assemble origami from modules for beginners,it is necessary to show another type of connection of elements among themselves. Consider making a simple fish figurine.

fish from origami modules

After making multi-colored parts, work begins with two blue ones. In this origami from modules, the connection of parts occurs in a different way. The corners of the first module are no longer inserted into the two pockets of the next, but as follows:

  • the right corner is inserted into the left pocket of one module;
  • left corner must be tightly inserted into the pocket of another module on the right side.

The result is a triangular bond. Two modules come out of one. Let's get back to making our fish figurine. Its nose consists of two modules, which are connected differently to create a steep transition to a wider part. The upper module is inserted with the left corner into the right pocket of the part of the second row, and with the right corner - into the left pocket of the element located next to it. The other corner of the first row is inserted in the same way. It immediately turns out a large expansion of the series, that is, from two modules, at first, not 3 standard, but 4 elements come out at once. Further work is carried out in the usual way until the required size of the figure is created.

The tail and fins are shaped differently. Sharp fins are made according to the first described scheme, that is, they are connected in a strip from modules of different colors. The tail is performed in the second way, that is, by expanding from one module to five.

Pen holder

Following the step-by-step origami instructions from the modules described above, you can assemble the following figure. This is -a round barrel, whose walls are assembled from small elements of different colors. To get beautiful spirals, the first bottom row is made up of alternate placement of flowers. Position the modules at right angles to the table surface.

Stand for pens

The bottom hole after work is sealed with a circle cut out of thick cardboard. This origami from the modules looks impressive. Moreover, it is a practical item that will not only decorate the student's desk, the stand will be used daily.

Origami flowers from modules

The seven-color flower from the favorite children's fairy tale Valentina Kataeva is assembled outside the box. The assembly of elements in the craft begins from the yellow center. Seven modules are arranged with pockets in the middle and at right angles to the table surface. Then there is a sharp expansion. To do this, two elements in the next row are inserted into each module according to the standard scheme. The difference from the usual scheme is that a third module is also placed between them, which is simply inserted in the middle between the corners. The third row of origami flowers from the modules is already being performed in the usual way, that is, from 3 modules it turns out 4.

flower from modules

You also need to follow the spiral arrangement of flowers. When the required volume of the circle is reached, work begins on individual petals. Here there is no longer an expansion of the figure, but a decrease in the number of details. Origami flowers from modules should end with one element on each of the seven petals. At the end neatthe movement bends the figure upwards. You need to act gently, slowly, so as not to ruin the structure.

Swan figurine

There are two ways to create such origami from modules. The neck is assembled by the first option for connecting parts, that is, each next module is inserted into two pockets of the previous one. The body is assembled according to the second method described above, that is, the corners of the modules of the first row are inserted into the pockets of two modules of the second.

swan from origami modules

Circular assembly is carried out to the required level. Then you need to work separately on the extension in several rows for attaching the neck and a wide rise in the tail. At the back, each row is reduced on both sides by one module, until only one piece remains in the center of the tail. A module of red or orange colors is attached to the head with the last element. It's a bird's beak.

Conclusion

The description of origami from the modules given in the article will help beginners to perform simple crafts without much effort. The work of making modular figurines is quite painstaking and time-consuming, but the crafts are very spectacular, able to decorate any voluminous work for an exhibition at school, decorate the interior of a room or office.

Popular topic