Decorating a flower pot with your own hands

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

In every home, indoor plants not only have a positive effect on the condition of indoor air, but also decorate it. However, if they are placed in a simple plastic or clay pot, then the living corner will look too trite and simple. Buying ready-made pots in the store is sometimes too expensive, and it is not always possible to find a container of the desired color or pattern.

Preface

Find a way out of a difficult situation will help our article, which describes in detail how to decorate a flower pot using different materials. They are quite accessible to every housewife and for sure, if you search well, you will find the necessary elements in the house. After all, the most common objects are used for decoration. These are scraps of fabric or burlap, the remains of lace, small sea pebbles or bizarre shells that you can bring from a trip to the sea coast.

To make the decoration of the flower pot look original, craftsmen use both twigs and pieces of broken ceramic tiles or old dishes, even eggshell. If you carefully read the article, then you can make any craft without much difficulty. For attaching decorative elements, thick PVA glue is mainly used. Acrylic paint and varnish can be useful for decorating a flower pot.

Drawing with paints on a pot

Often housewives want to see some pattern on the flower pot. It can be a repeating ornament - geometric or floral. If the master knows how to draw well, then a pot decorated with flowers or plot pictures will look beautiful.

In the children's room, you can decorate a flower pot using images of heroes from popular films or cartoons. The child will be very happy to have SpongeBob in his room.

First, the surface of the pot is completely covered with acrylic yellow paint. This will be the background for the future image. Then, with a simple pencil, the contours of the hero's facial features are applied. Using different colors, you can quickly transfer them to a yellow background. If you can't draw, it won't get in the way of your creative idea, as any hero can be found on the Internet. If you are not friends with a pencil at all, then there is also an option. You can find the usual coloring with the desired character. Having printed the desired picture on the printer, it remains simply to transfer it to the pot. To do this, you can use a carbon paper or indentation into the paint with a sharp pencil.

Then the details are painted. After the product has completely dried, you can start transplanting a flower.

Stampingpattern on a plastic pot

Decoration of plastic flower pots can also be done with acrylic paints, but it is better not to completely cover the surface, since the pot has a fragile structure and can deform from pressure, while the paint will crack and crumble over time. If you want to place a drawing on such a pot, then choose colored plastic so that you don’t have to do a background solid color. The drawing may be small. To do this, they often use templates cut out of either plastic or cardboard.

You will also need acrylic paint and a sponge. In order not to get smeared, it is advisable to adapt the sponge to some kind of stick. The template is applied to the central part of the pot. The sponge is dipped into the paint of the desired color, lightly pressed against the edge of the can so that excess paint comes out. Only then, with priming movements according to the template, the drawing is transferred to the flower pot.

You can do this decoration of flower pots with your own hands in the center of the product, or you can apply a pattern in a circle from below or above the craft. Then the template is cut long so that when bent it covers the entire surface of the pot.

Cloth wrapping

Decoration ideas for flower pots can vary. As well as craft supplies. If after sewing you still have a piece of bright fabric with a floral pattern, then you can make the design of the pot, as in the photo below.

First, the perimeter of the pot is measured in its widest part and the narrowest at the bottom. Then you need to draw a pattern in the shape of a trapezoid on the fabric. The top line is the size of a wide measurement plus 1 cm on each side to overlap the fabric. The lower strip also has a length corresponding to the lower part. They also leave a couple of centimeters, as pieces of fabric are overlapped so that the pot is not visible. Additionally, you need to add a few centimeters at the top and bottom, since the fabric after gluing will need to be folded inward so that the container itself is not visible.

The pot is carefully smeared with PVA glue, on which blanks are applied. Pressing down with your hand over the entire surface of the fabric, we level the material well so that there are no wrinkles on the fabric.

The remaining pieces of fabric on top and bottom should be cut into thin strips, then when pasted on the round bottom and top of the pot there will be no wrinkles. The bottom is not completely sealed, a hole for excess liquid must be left.

Decorating a flower pot with a cloth ends with applying a layer of PVA or acrylic lacquer over the fabric. After the surface has dried, you can start transplanting the plant into a beautiful pot.

Rustic

Natural fabrics are in fashion now, so you can use burlap when decorating a flower pot. The material can be glued onto the product by adding a couple of decorative elements, such as lace or satin ribbon bows.

Decorating a flower pot with burlap can be done without glue. It is enough to cut a square from the fabric and put a pot in its middle, connect all the corners at the top.

To keep the burlap and not slip, a decorative bandage is sewn in advance. A satin ribbon edging is sewn onto a strip of burlap. You can use a wide strip of satin, then you can insert a thin rope into it to tie a bandage. Or you can use a thinner tape and just leave the edges unstitched at the end.

Such burlap decorative elements are used temporarily, for example, when there is an outdoor party or a wedding in a private house. On the veranda for guests or around the alley along which the newlyweds go to the table, such pots with bright flowers are put up. After the feast, the burlap must be removed, as the fabric will become wet when watering the flowers.

Using hemp rope

If you want to use natural decor to decorate flower pots, then sticking layers of hemp natural rope is the best option. To do this, you can coat the pot with PVA glue and, starting from the top, attach the rope, tightly winding it around the circumference of the plant container.

You can decorate the craft by making several braids with the help of interlacing. After applying the main winding to the pot, the pigtail is placed in a strip on top or bottom of the pot. It is also glued to PVA. It turns out a three-dimensional detail that diversifies the decoration of the flower pot. The photo above shows what the finished work looks like.

Sticking eggshells

You can decorate the surface of a flower pot with any material, for example,pasted in a circle broken into small pieces of the shell. To do this, remove the inner film and rinse the shell well. Then everything is laid out on a dry napkin to dry. Then that part of the surface, which will be covered with a shell, is smeared with PVA glue. It should have a thick consistency.

Parts of the shell can be either large or small, depending on the selected pattern. You can paste over the surface completely, or you can create an ornament or a wavy line. It is also interesting to combine this material with others. Subsequently, the shell can be painted in any color. The applied shell looks original on some colored background. Some craftsmen pre-paint the shell, and only then stick it. To fix the result of the work, you need to cover the entire surface of the pot with acrylic varnish after pasting with such a fragile material. A layer of varnish will hold the egg shell and prevent it from falling out.

Delicate pot cover

You are already familiar with decorating the surface of flower pots with fabric. This manufacturing option is similar. All work is carried out in the same way, only the lace is not necessarily placed over the entire surface. You can stick the material on the PVA glue in strips, changing the lace ribbons.

You can add all sorts of additional elements to this material, for example, create a magnificent bow from satin ribbons or combine it with a plain or colored fabric.

Marine theme

Floral decorationa pot of shells brought from vacation will help to fix the seascape and pleasant memories of a great time in your memory. If the shells are smooth and without voids, then they are glued to the surface with superglue immediately, correctly placing the different types.

If you have collected shells with a void inside, then before sticking to the pot itself, you need to fill in these voids. It is better to use finely chopped pieces of paper or newspaper. The shell is completely filled after soaking the paper in glue. When the crafts are completely dry, and it will take at least twelve hours, you can start pasting the pot.

Ceramic tile mosaic

In an original way, you can decorate the appearance with the help of tiles or dishes broken into small pieces. You can fold some pattern with a mosaic, or you can simply place them in a chaotic manner. Glue the tile onto the pot using mounting glue. But this is not the end of the work.

In order for the surface of the pot to remain smooth, you need to putty the applied layers. When the putty dries, its excess is washed off with a sponge dipped in water. This item is very strong and durable. You can decorate large concrete flower beds in the garden in this way.

The options presented in the article are made without much effort, even an amateur can do such crafts. Good luck!