Pattern for knitting caps. Knitting: patterns for children's hats
Pattern for knitting caps. Knitting: patterns for children's hats
Anonim

Beanie knits fairly quickly and requires a little yarn. However, for beginner craftswomen, some stages of work can be difficult.

knitting pattern for hats

Choosing a pattern for hats with knitting needles is quite simple, it is much more difficult to correctly cut the loops at the crown. With too sharp a decrease, the hat comes out shallow. If you cut fewer loops than required, the shape of the headdress will be elongated.

It's good when designers develop patterns that take into account all the nuances and make it easy and quick to knit a hat. After reading the article, you can choose the appropriate pattern for hats with knitting needles. Several are presented, some of them so simple that they make it easy to calculate the contraction, others already have the principle of decreasing loops in their schemes.

Pattern "Braids" for a hat with knitting needles

One of the most beautiful and at the same time quite complex patterns are braids (theiralso called arans and harnesses). The essence of the ornament is that a certain number of loops are interchanged with neighboring loops, and then knitted. Very voluminous and attractive canvases are obtained.

braid pattern for a children's hat with knitting needles

The photo above shows a baby hat with universal braids. They are great for decorating hats for boys and girls. In addition, you can increase the number of rapports to make a product for an adult.

However, some experience is required to use this beautiful pattern for a knitted hat.

Knitting a hat with braids

Traditionally, various types of elastic bands are used to decorate the bottom edge of the cap. In this case, the developers took care of the knitters and offered them an elastic band pattern, from which it would then be easy to move on to the main pattern.

braid pattern for knitting hats

The rapports of the elastic band and the ornament with braids are the same - they make up 16 loops each (P). Therefore, you need to calculate from the control sample how many rapports will be in the canvas and get to work:

  1. Dial on the required number of loops.
  2. Knit fabric according to scheme A.1 to a height of at least five centimeters.
  3. Go to Diagram A.2. If the work is done with thick yarn, one rapport is enough. Depending on how long the hat is needed, the ornament should be repeated one or two more times.
  4. Complete the knitting of the hat should be according to scheme A.3. The remaining loops at the end are collected on a strong thread and tightened into a ring.
  5. Onthe last step is to sew a hat and hide the tails of the threads.

Steaming or ironing hats is not worth it, as they can lose their shape, become too soft and thin.

Pattern for a girl's hat with knitting needles: jacquard is always in fashion

The next model always looks appropriate and relevant, jacquard ornaments do not go out of fashion and suit absolutely everyone. To create this hat, you need to prepare the material of six shades (one for the background and five as additional colors).

knitting pattern for a girl's hat

Hat knitting order:

  1. Make a control sample, calculate how many stitches per 10 cm and cast on the required number for the first row.
  2. Knit an elastic band to a height of five to seven centimeters. Here you can use absolutely any gum familiar to the craftswoman. Suitable classic 1:1, 2:2 (it was used by the designer who developed the model) or voluminous English.
  3. When the elastic is finished, it's time to move on to the main pattern.
  4. At the last stage, cuts are performed in twelve places of the row.

A neat inside is a sign of a quality product

The secret of a neat jacquard is in the proper handling of dead threads. If you just leave them on the wrong side, long broaches are formed. When wearing a product, they stretch, break and lead to deformation of the ornament.

beautiful knitting pattern for a hat

Experienced craftswomen twist a non-working thread from a workingevery three to five loops, and then continue to use the worker. Consider an example of knitting a row in which ten loops of a light beige thread (No. 1) and one of a dark beige thread (No. 2) alternate. You should knit the first three loops with yarn No. 1, then interlace No. 1 with No. 2 and knit the next three with thread No. 1. After that, weaving is performed again and the last four are knitted with thread No. 1. Picking up a non-working thread, you should carefully monitor the tension: too weak will lead to the fact that a non-working thread will be visible through a jacquard ornament. However, it is also not recommended to over-tighten the canvas, as it turns out to be uneven.

How to cut loops at the crown

A similar pattern for hats with knitting needles is quite difficult to cut, so the diagram shows a flat section of the fabric. The ornament allows you to decorate the main part of the headdress, and the reduction of the loops on the crown is performed as follows:

  • Mark six stitches in a row with markers.
  • In each front row, one loop is cut before and after the marked ones. Thus, there is a decrease in the number of loops by 12 pcs. Visually, the canvas is divided into six wedges.
  • The last 20-25 are collected on a strong thread and pulled into a ring.

After stitching, the hat is ready.

Simple hat for beginners

The photo below shows the simplest hat pattern you can think of.

knitting pattern for hats

This headpiece is a rectangle tied at the top with a strong thread.

Descriptionwork:

  1. According to the control sample made in advance, calculate the number of loops for the first row.
  2. Dial the resulting number of elements on the knitting needles.
  3. Knit according to the scheme, which is in the lower left corner of the photo, the canvas to a height of 10 cm. This pattern has the same set of elements as a 1:1 elastic band. Only these loops are knitted with an offset: the first row starts from the front P, the second (purl row) also from the front, the third (front row) from the purl P and the fourth (purl) - from the purl P. Thus, this pattern for the children's hat with knitting needles repeats every four rows. Rapport includes only two loops.
  4. When the pattern is finished, move on to stocking stitch.

The finished hat is pulled together with a thread and sewn together.

For children's products, you should select a material that contains a maximum of natural fibers, but does not prick. Optimum composition: 100% merino wool. If there is a suspicion that the headdress will be hot, you can use merino wool with cotton or bamboo. You should not buy yarn with acrylic, as this synthetic material does not warm at all, but promotes sweating.

It should be noted that almost any pattern for hats with knitting needles will look great when knitted from a tightly twisted thread.

Popular topic